WD-N1-CF replacement for waterdrop WD-N1-W countertop ro water filtration system
$37.99
Item model number WD-N1-CF Material PP cotton and carbon block Filter life 6 months Show More Information Dissatisfied with traditional under-sink RO filters? Many people complain about these systems and their difficult installation processes. Others also talk about how it is uninformative about water quality and TDS levels. And being...
Item model number
WD-N1-CF
Material
PP cotton and carbon block
Filter life
6 months
Dissatisfied with traditional under-sink RO filters?
Many people complain about these systems and their
difficult installation processes. Others also talk about how it is uninformative about water
quality and TDS levels. And being a permanent fixture, you can only access fresh water where
it’s set up. There has to be a better option without these problems.
This is where our countertop reverse osmosis water
filter comes in handy. It’s a plug-and-play device, so no need to install. It’s smooth and easy
to operate, plus it analyzes water quality in real time with its smart screen.
Get clean, purified water anytime you want with the Waterdrop N1 Countertop Reverse Osmosis Water Filtration System!
Our tabletop water dispenser has 2 filter cartridges that
offer a 4-stage filtration process. This system removes 1,000+ impurities, including metals, large
particles, and chlorine. The water then runs through a light for further purification, which you can
set at 20 or 60 minutes for the machine to handle automatically.
This RO water purifier has a smart display screen that
shows the machine’s status and the water quality. Get real-time information on TDS levels, tank
contents, and filter life and rest assured you are drinking fresh water every time. Choose from 4oz,
8oz, 16oz, or manual volume setting up to 1.5L for precise water delivery without spills.
With the 3:1 drain ratio of this countertop water dispenser
with filter, you’re making the eco-conscious choice. It features a water recycling technology that
re-filters any waste water. Paired with its automatic flushing and standby functions, you’ll save
money on power and water while helping the Earth.
How often should I change the filter?
The service life of the CF filter is 6 months or 550 gallons; whichever
comes first will depend on the local water quality. This long lifespan helps save considerably on filter
replacement.
How do I replace the CF replacement water filter for N1 countertop reverse osmosis system?
Follow the instructions below:
1.Remove the water tank cover. Hold the machine with one hand and remove the water tank with the other.
2.Open the system top cover, twist the CF filter 90° counterclockwise to unlock it, and take out the old filter.
3.Remove the wrappings and protective cap from the new filter.
4.Insert the new filter into its corresponding hole. Twist the filter 90° clockwise to lock it in place.
5.Close the system top cover. Replace the water tank after filling it with water, and then close the water tank cover.
6.Press and hold the CF filter life reset button for 5 seconds until the system beeps. The CF life indicator light will turn blue and later go out.
7.After resetting, it will flush automatically for 5 minutes. During the flushing process, the outer ring of the display screen will light up, showing a dynamic clockwise cycle.
8.After 5 minutes, the machine will stop flushing and display L1 to remind you to change the water in the feed water tank. Take out the water tank, pour out the concentrated water, and add water again.
Now you can use the machine normally.
1.Remove the water tank cover. Hold the machine with one hand and remove the water tank with the other.
2.Open the system top cover, twist the CF filter 90° counterclockwise to unlock it, and take out the old filter.
3.Remove the wrappings and protective cap from the new filter.
4.Insert the new filter into its corresponding hole. Twist the filter 90° clockwise to lock it in place.
5.Close the system top cover. Replace the water tank after filling it with water, and then close the water tank cover.
6.Press and hold the CF filter life reset button for 5 seconds until the system beeps. The CF life indicator light will turn blue and later go out.
7.After resetting, it will flush automatically for 5 minutes. During the flushing process, the outer ring of the display screen will light up, showing a dynamic clockwise cycle.
8.After 5 minutes, the machine will stop flushing and display L1 to remind you to change the water in the feed water tank. Take out the water tank, pour out the concentrated water, and add water again.
Now you can use the machine normally.
What will happen if I do not change my filter when the filter life indicator light turns red?
Over-used filters will degrade the filtration performance, causing
contaminants to leak back into the water. This will adversely affect your health. To avoid this, we
advise that you immediately replace the replacement filter cartridge for N1 countertop water dispenser
if the filter life indicator light turns red.
Why is the filter life indicator light still red after changing the filter?
You have forgotten or failed to reset the filter life indicator light.
Please reset it again: Press and hold the filter life reset button for 5 seconds until the system beeps.
The filter life indicator light will then turn red and go out.
After filter replacement and flushing, the machine displays L1 to prompt a water change. Can I continue to use it without changing the water?
After the CF filter is replaced, the machine will automatically flush for
5 minutes. The flushed concentrated water will return to the original water tank, resulting in
relatively more impurities in the original water. To protect the filter life and ensure you get only
fresh drinking water from the system, change the water in the feed water tank before using the system
properly.
Is the CF filter material safe to use?
Yes. The replacement CF filter for this N1 countertop reverse osmosis
water filter is made of BPA-free materials to protect you from the secondary contaminants in the filter
cartridge.
Does the installation of this CF water filter require tools or installation kits?
Thanks to the exquisite design, it is easy to install and operate this
system without any tool or other installation kits.
Easy Replacement
The 3-second filter replacement process requires no tools or
plumbing skills.
Multiple Filter Material
The CF replacement filter for N1 countertop reverse osmosis system
adopts PP cotton and carbon block to effectively trap large particles and heavy metals in tap water.
You can enjoy crisp and fresh-tasting water with Waterdrop.
Extensive Service Life
The service life of the CF filter is 6 months. This long lifespan
helps save considerably on filter replacement.
Premium Material
The selected coconut shell made carbon block ensures you and your
family safe and clean filtered water always.
Your Purchase, Your Love
Invest in sustainability, lasting clean water, and improved health
for children and their families.